All the renowned properties of the original Polyx-Oil – tinted for individual creativity. Polyx-Oil Tints are water-repellent, dirt-resistant and durable. The surface is pleasant to touch, has an even and harmonic optic and is based on natural, re
For interior use only: Ideal for wooden floors, solid or plank wood, strip parquet, OSB or cork flooring. Also recommended for wooden furniture, joinery and doors.
Approximate coverage: 30m²/L with one coat
Number of coats: 1 coat + clear Polyx-Oil
Application tools: Roller or brush
Approx. drying time: 8 -10hrs
Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.
After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.
Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.
For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.
For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly.
On cork, longer drying times are to be taken into consideration (at least 24 hours).
Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.
If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first.
Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.
Regular Cleaning: Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads.
Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
*Untreated wood
**Treated with Polyx®-Oil Original
is the classic types of wood. A traditional wood, yet timeless and always in fashion.
Origin: Europe
is the most important European type of wood. The bright knotty wood is used everywhere in interior design and is always on trend.
Origin: Scandinavia / Russia
is an unobtrusive predominantly bright wood with a clear and distinctive drawing.
Origin: Europe
shows up as yellow-reddish brown wood with fine pores
Origin: Europe
is a classic. This wood is particularly popular because of its warm hue.
Origin: Scandinavia / Russia
is a coveted native species reddish-brown colour.
Origin: Europe
Top Tips:
Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.
The wood’s true beauty is accomplished by using Osmo Polyx®-Oil. The emphasis on the wood’s grain and natural characteristics provides a warm and rich effect to ensure that any interior looks luxurious and elegant. Each wood has its own style and unique charm, and is seductive from the first sight.
The wood species below are not recommended for Polyx-Oil Original. Please use Osmo Wood Wax Finish Extra Thin instead.
FREE standard delivery on orders over £75 ex VAT for UK Mainland
Orders under £75: | Orders over £75: | ||
---|---|---|---|
Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
All the renowned properties of the original Polyx-Oil – tinted for individual creativity. Polyx-Oil Tints are water-repellent, dirt-resistant and durable. The surface is pleasant to touch, has an even and harmonic optic and is based on natural, re
For interior use only: Ideal for wooden floors, solid or plank wood, strip parquet, OSB or cork flooring. Also recommended for wooden furniture, joinery and doors.
Approximate coverage: 30m²/L with one coat
Number of coats: 1 coat + clear Polyx-Oil
Application tools: Roller or brush
Approx. drying time: 8 -10hrs
Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.
After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.
Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.
For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.
For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly.
On cork, longer drying times are to be taken into consideration (at least 24 hours).
Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.
If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first.
Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.
Regular Cleaning: Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads.
Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
*Untreated wood
**Treated with Polyx®-Oil Original
is the classic types of wood. A traditional wood, yet timeless and always in fashion.
Origin: Europe
is the most important European type of wood. The bright knotty wood is used everywhere in interior design and is always on trend.
Origin: Scandinavia / Russia
is an unobtrusive predominantly bright wood with a clear and distinctive drawing.
Origin: Europe
shows up as yellow-reddish brown wood with fine pores
Origin: Europe
is a classic. This wood is particularly popular because of its warm hue.
Origin: Scandinavia / Russia
is a coveted native species reddish-brown colour.
Origin: Europe
Top Tips:
Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.
The wood’s true beauty is accomplished by using Osmo Polyx®-Oil. The emphasis on the wood’s grain and natural characteristics provides a warm and rich effect to ensure that any interior looks luxurious and elegant. Each wood has its own style and unique charm, and is seductive from the first sight.
The wood species below are not recommended for Polyx-Oil Original. Please use Osmo Wood Wax Finish Extra Thin instead.
There are no reviews yet.
FREE standard delivery on orders over £75 ex VAT for UK Mainland
Orders under £75: | Orders over £75: | ||
---|---|---|---|
Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
Reviews
There are no reviews yet.