Rubio Monocoat – Oil Plus 2C

One Coat System.

Rubio Monocoat Oil Plus 2C is a next-generation product that colours and protects your wood in 1 single layer. The combination of the oil (A) and the accelerator (B) ensures a quick dry, quick cure and superior protection.

Available in a large range of colours to suit all projects. Its heat and water-resistance makes it ideal for kitchens and bathrooms. Rubio Monocoat Oili Plus 2C is Food Contact Compliance. You can apply it to floors, furniture, stairs… And our oil is also ideal for worktops and other surfaces where food is involved. 

Application in 3 easy steps:

Application in 3 easy steps:

Preparation: Untreated wood: sand according to the rules. Vacuum clean thoroughly, remove any remaining dust with RMC Cleaner. Let the surface dry. Carefully mix and stir the 2 components.

Step 1:

Apply a small amount of RMC Oil Plus 2C and spread it out with a cloth, a brush or polisher with a thin beige pad.

Treat one zone of 5 - 10 m2 at a time.

Step 2:

Leave to react for a couple of minutes.

Step 3:

Remove all excess oil with a non-fluffy cloth or polisher with a thin white pad within 15 minutes per zone. The surface should feel hand-dry after removal of the excess product.

In a well ventilated room, the surface can be used 24 - 36 hours after the application.

---

FAQs

How many layers do I need to apply?

Only one!

Is there a clear or non-pigmented oil?

Yes, it is called 'Pure'

Can I use the product on already finished wood?

Unfortunately, you'll need to sand up to a 120 grit. Starting from 40, to 60, to 80, then finally to 120. The oil needs to bind with the wood fibres due to the Molecular Bonding Technology.