Read more
4 in stock
The special drive – T-STAR plus – is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR plus bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!
The countersunk head (or flat countersunk head) is the most common head geometry in the world of SPAX. It has a conical shape and, in the case of SPAX, is characterised by the 90° MULTI head. Our countersunk head screws offer the ideal compromise between maximum resistance to tightening torques and a discreet and attractive screw connection. With its polygonal underside (“pockets”), the flat countersunk head mills its own way into the wood and can therefore be countersunk into the wood cleanly and flush without having to pre-drill the screw hole. What this means for you: Flush screw insertion becomes child’s play – with no need to pre-drill or countersink the screw hole.
In contrast to the partial thread, the full thread on most of our full-thread screws covers the entire – or most of – the screw length from tip to head. The more thread turn a screw has, the greater the tensile and compressive forces that can be absorbed by these screws. We make particular use of this in structural wood construction, where our full-thread screws are called upon for heavy-duty wood connections. What this means for you: Wood connections with full-thread screws offer maximum reliability when it comes to resilience, and there’s no need to use any ugly zinc-plated fittings!
The term 4CUT is used to describe the fact that the point of our screws is not rounded, but rather shaped like an arrow. These four edges displace the wood fibres upon insertion and thus create space for the core diameter of the screw. The otherwise inevitable expansion at the core of the wood is effectively reduced, minimising wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood. What this means for you: Practically no pre-drilling required any longer – even in the edge areas of your workpiece that are normally prone to splitting! The 4CUT means you can skip an entire work step.
The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.
The countersunk head (also known as the flat countersunk head) has a polygonal underside (“pockets”) that mills its way into the wood and can therefore be countersunk without having to pre-drill the screw hole. The flat countersunk head sits flush with the surface.
Unlike the partial thread, the full thread spans the entire screw length. The more thread turn a screw has, the greater the tensile and compressive forces that can be transferred by these screws to the wood. Our full-thread screws are predominantly used for heavy-duty wood connections.
The term 4CUT stands for the arrow-shaped design of the screw tip. These edges displace the wood fibres upon insertion and create space for the core diameter of the screw. The expansion at the core of the wood is reduced, preventing wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood.
FREE standard delivery on orders over £75 ex VAT for UK Mainland
| Orders under £75: | Orders over £75: | ||
|---|---|---|---|
| Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
| Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
The special drive – T-STAR plus – is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR plus bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!
The countersunk head (or flat countersunk head) is the most common head geometry in the world of SPAX. It has a conical shape and, in the case of SPAX, is characterised by the 90° MULTI head. Our countersunk head screws offer the ideal compromise between maximum resistance to tightening torques and a discreet and attractive screw connection. With its polygonal underside (“pockets”), the flat countersunk head mills its own way into the wood and can therefore be countersunk into the wood cleanly and flush without having to pre-drill the screw hole. What this means for you: Flush screw insertion becomes child’s play – with no need to pre-drill or countersink the screw hole.
In contrast to the partial thread, the full thread on most of our full-thread screws covers the entire – or most of – the screw length from tip to head. The more thread turn a screw has, the greater the tensile and compressive forces that can be absorbed by these screws. We make particular use of this in structural wood construction, where our full-thread screws are called upon for heavy-duty wood connections. What this means for you: Wood connections with full-thread screws offer maximum reliability when it comes to resilience, and there’s no need to use any ugly zinc-plated fittings!
The term 4CUT is used to describe the fact that the point of our screws is not rounded, but rather shaped like an arrow. These four edges displace the wood fibres upon insertion and thus create space for the core diameter of the screw. The otherwise inevitable expansion at the core of the wood is effectively reduced, minimising wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood. What this means for you: Practically no pre-drilling required any longer – even in the edge areas of your workpiece that are normally prone to splitting! The 4CUT means you can skip an entire work step.
The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.
The countersunk head (also known as the flat countersunk head) has a polygonal underside (“pockets”) that mills its way into the wood and can therefore be countersunk without having to pre-drill the screw hole. The flat countersunk head sits flush with the surface.
Unlike the partial thread, the full thread spans the entire screw length. The more thread turn a screw has, the greater the tensile and compressive forces that can be transferred by these screws to the wood. Our full-thread screws are predominantly used for heavy-duty wood connections.
The term 4CUT stands for the arrow-shaped design of the screw tip. These edges displace the wood fibres upon insertion and create space for the core diameter of the screw. The expansion at the core of the wood is reduced, preventing wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood.
There are no reviews yet.
FREE standard delivery on orders over £75 ex VAT for UK Mainland
| Orders under £75: | Orders over £75: | ||
|---|---|---|---|
| Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
| Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
Reviews
There are no reviews yet.