On all orders over £99 ex. VAT.
Register now for discounted purchases.
Items ready for pick-up within one hour.
On all orders over £99 ex. VAT.
Register now for discounted purchases.
Items ready for pick-up within one hour.
Description
- Thread Length: 47 mm
- Blade Size: T20
- Head Diameter: 8 mm
- Total Length: 55 mm
The special drive – T-STAR plus – is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR plus bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!
Of all of our head shapes, the raised countersunk head is undoubtedly the most attractive. In contrast to the countersunk head, which is designed completely flat to enable flush countersinking, the raised countersunk head has a slightly convex shape on top. Depending on screw type and surface material (stainless steel, nickel-plated, WIROX and antique), these screws not only function as a necessary fastener, but also as a decorative element. This is important in tasks such as furniture construction or fastening skirting boards.What this means for you: No need to countersink screw heads or waste time camouflaging screw holes in visible areas of furniture and skirting.
In contrast to the partial thread, the full thread on most of our full-thread screws covers the entire – or most of – the screw length from tip to head. The more thread turn a screw has, the greater the tensile and compressive forces that can be absorbed by these screws. We make particular use of this in structural wood construction, where our full-thread screws are called upon for heavy-duty wood connections. What this means for you: Wood connections with full-thread screws offer maximum reliability when it comes to resilience, and there’s no need to use any ugly zinc-plated fittings!
The term 4CUT is used to describe the fact that the point of our screws is not rounded, but rather shaped like an arrow. These four edges displace the wood fibres upon insertion and thus create space for the core diameter of the screw. The otherwise inevitable expansion at the core of the wood is effectively reduced, minimising wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood. What this means for you: Practically no pre-drilling required any longer – even in the edge areas of your workpiece that are normally prone to splitting! The 4CUT means you can skip an entire work step.
With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. “A” stands for austenite, a mix of iron and carbon with the alloying elements chrome, nickel and molybdenum. The 2(1-5) describes the alloy grade, in other words, the chrome and nickel content. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength, However, they have low resistance to saltwater and acids. They are therefore a reliable, durable choice for outdoor applications in non-coastal areas.What this means for you: With our stainless steel A2 screws, you are optimally equipped for corrosion-resistant fastening in virtually all non-coastal construction projects.
The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.
In contrast to the countersunk head, which is designed flat to enable flush screw countersinking, the raised countersunk head has a convex shape. Depending on screw type and surface material (stainless steel, nickel-plated, antique), these screws can be used as a decorative element in furniture construction or for fastening skirting boards.
Unlike the partial thread, the full thread spans the entire screw length. The more thread turn a screw has, the greater the tensile and compressive forces that can be transferred by these screws to the wood. Our full-thread screws are predominantly used for heavy-duty wood connections.
The term 4CUT stands for the arrow-shaped design of the screw tip. These edges displace the wood fibres upon insertion and create space for the core diameter of the screw. The expansion at the core of the wood is reduced, preventing wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood.
With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength. However, they have low resistance to saltwater and acids. They are therefore used in outdoor applications in non-coastal areas.
Reviews
Write a review
Technical
Delivery
FREE standard delivery on orders over £75 ex VAT for UK Mainland
| Orders under £75: | Orders over £75: | ||
|---|---|---|---|
| Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
| Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
Description
Description
- Thread Length: 47 mm
- Blade Size: T20
- Head Diameter: 8 mm
- Total Length: 55 mm
The special drive – T-STAR plus – is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR plus bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!
Of all of our head shapes, the raised countersunk head is undoubtedly the most attractive. In contrast to the countersunk head, which is designed completely flat to enable flush countersinking, the raised countersunk head has a slightly convex shape on top. Depending on screw type and surface material (stainless steel, nickel-plated, WIROX and antique), these screws not only function as a necessary fastener, but also as a decorative element. This is important in tasks such as furniture construction or fastening skirting boards.What this means for you: No need to countersink screw heads or waste time camouflaging screw holes in visible areas of furniture and skirting.
In contrast to the partial thread, the full thread on most of our full-thread screws covers the entire – or most of – the screw length from tip to head. The more thread turn a screw has, the greater the tensile and compressive forces that can be absorbed by these screws. We make particular use of this in structural wood construction, where our full-thread screws are called upon for heavy-duty wood connections. What this means for you: Wood connections with full-thread screws offer maximum reliability when it comes to resilience, and there’s no need to use any ugly zinc-plated fittings!
The term 4CUT is used to describe the fact that the point of our screws is not rounded, but rather shaped like an arrow. These four edges displace the wood fibres upon insertion and thus create space for the core diameter of the screw. The otherwise inevitable expansion at the core of the wood is effectively reduced, minimising wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood. What this means for you: Practically no pre-drilling required any longer – even in the edge areas of your workpiece that are normally prone to splitting! The 4CUT means you can skip an entire work step.
With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. “A” stands for austenite, a mix of iron and carbon with the alloying elements chrome, nickel and molybdenum. The 2(1-5) describes the alloy grade, in other words, the chrome and nickel content. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength, However, they have low resistance to saltwater and acids. They are therefore a reliable, durable choice for outdoor applications in non-coastal areas.What this means for you: With our stainless steel A2 screws, you are optimally equipped for corrosion-resistant fastening in virtually all non-coastal construction projects.
The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.
In contrast to the countersunk head, which is designed flat to enable flush screw countersinking, the raised countersunk head has a convex shape. Depending on screw type and surface material (stainless steel, nickel-plated, antique), these screws can be used as a decorative element in furniture construction or for fastening skirting boards.
Unlike the partial thread, the full thread spans the entire screw length. The more thread turn a screw has, the greater the tensile and compressive forces that can be transferred by these screws to the wood. Our full-thread screws are predominantly used for heavy-duty wood connections.
The term 4CUT stands for the arrow-shaped design of the screw tip. These edges displace the wood fibres upon insertion and create space for the core diameter of the screw. The expansion at the core of the wood is reduced, preventing wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood.
With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength. However, they have low resistance to saltwater and acids. They are therefore used in outdoor applications in non-coastal areas.
Reviews
Reviews
Reviews
There are no reviews yet.
Write a review
FAQ
Technical
Technical
Delivery
Delivery
FREE standard delivery on orders over £75 ex VAT for UK Mainland
| Orders under £75: | Orders over £75: | ||
|---|---|---|---|
| Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
| Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
Reviews
There are no reviews yet.