1 in stock
On all orders over £99 ex. VAT.
Register now for discounted purchases.
Items ready for pick-up within one hour.
On all orders over £99 ex. VAT.
Register now for discounted purchases.
Items ready for pick-up within one hour.
Description
PRODUCT OVERVIEW
TensorGrip® L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.
FEATURED PROPERTIES
- Fast Drying.
- IMO “WHEELMARK” approved – Certificate number: 164.112/1121/WCL MER0522
- High Temp Resistance – 120°C.
- Class-1 Fire Rating.
- BS 6222 Bond Strength Approval.
DEVELOPED FOR
- Aluminum
- FRL
- FRP/GRP
- Standard Laminate
APPLICATION
- This product is designed to be applied to two surfaces to be bonded together. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60 °F – 80 °F (16 °C – 27 °C).
- Use with adequate ventilation. When possible we recommend shaking the canister well before using.
- Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
- Prior to use, check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates. 90°
1. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc.
2. Spray about 10-20 cm (4” – 8”) away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive.
3. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. 4. Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
5. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
6. If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Reviews
Write a review
Technical
Delivery
FREE standard delivery on orders over £75 ex VAT for UK Mainland
| Orders under £75: | Orders over £75: | ||
|---|---|---|---|
| Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
| Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
Description
Description
PRODUCT OVERVIEW
TensorGrip® L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.
FEATURED PROPERTIES
- Fast Drying.
- IMO “WHEELMARK” approved – Certificate number: 164.112/1121/WCL MER0522
- High Temp Resistance – 120°C.
- Class-1 Fire Rating.
- BS 6222 Bond Strength Approval.
DEVELOPED FOR
- Aluminum
- FRL
- FRP/GRP
- Standard Laminate
APPLICATION
- This product is designed to be applied to two surfaces to be bonded together. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60 °F – 80 °F (16 °C – 27 °C).
- Use with adequate ventilation. When possible we recommend shaking the canister well before using.
- Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
- Prior to use, check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates. 90°
1. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc.
2. Spray about 10-20 cm (4” – 8”) away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive.
3. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. 4. Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
5. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
6. If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Reviews
Reviews
Reviews
There are no reviews yet.
Write a review
FAQ
Technical
Technical
Delivery
Delivery
FREE standard delivery on orders over £75 ex VAT for UK Mainland
| Orders under £75: | Orders over £75: | ||
|---|---|---|---|
| Standard Delivery (usually next day) |
£4 ex VAT | FREE | |
| Guaranteed Next Day | £10 ex VAT | £10 ex VAT |
Delivery charges apply to UK Mainland. Highlands and Islands may incur an additional charge. Please email us to check carriage charge.
Standard delivery – Orders placed before 2pm will normally be dispatched the same day for next day delivery by our preferred couriers or our own vehicles.
We offer a guaranteed next day pre noon delivery service for £10 ex VAT for orders placed before 2pm.
Orders placed after 2.00pm will not be processed until the next working day. Our delivery service operates Monday - Friday.
Goods will require a signature on delivery.
Reviews
There are no reviews yet.